Dividing Grilled Partitions for Lumber Installation

Armour's L Series Stall Divider Grills, commonly called partition grilles, can be used in a variety of locations in the stall. In between stalls, back of stalls, or stall ends equipped with these ventilating grilles can increase air-flow and equine visitation. Partition grilles are assembled for 1-1/2" lumber installation. Armour's L Series divider grilles arrive standard 3'0" or 4'0" in height and all standard lengths are listed. Custom size grilles can be ordered through our sister website at www.armourgates.com. Divider grilles are assembled using 1" diameter round vertical bars with 3" between bar spacing and arrive welded as one (8'0" or less) or two pieces (8'6" or larger). Partition grilles arrive with predrilled installation holes and fasteners. L Series divider grills are designed to fit horizontally between an existing end stall post and door/front post and vertically below the stall header and above your existing lumber stall wall. Stall divider walls of 1-1/2" lumber can be constructed using Armour's Receiver Channels. Receiver Channels are "u" shaped channels that are fastened vertically to the existing stall end post and door/front post. Once fastened into place, lumber can be inserted or loaded horizontally into channels to construct stall walls. Armour divider grilles are offered in two stall packages: 1) grille, 2) grille with receiver channel. The L Series Grilles listed here will not fit a double lumber wall 6" or 8" in thickness, please call one of our product specialist about Armour's C Series Grilles at 800-876-7706.